Mission officials at NASA\u2019s OSIRIS-REx have successfully unlocked the last two of the 35 fasteners from the sampler head that had prevented the remainder of asteroid Bennu sample material from being accessed.<\/p>\n
About 8.8 ounces of rocky material collected from the surface of the asteroid Bennu in 2020 was brought to Earth by the OSIRIS-REx (short for Origins, Spectral Interpretation, Resource Identification, and Security-Regolith Explorer) in late September.<\/p>\n
However, two stuck fasteners prevented further access to the rocky space treasure. The sample processed so far includes the rocks and dust found on the outside of the sampler head, as well as a portion of the bulk sample from inside the head, which was accessed through the head\u2019s mylar flap.<\/p>\n
\u201cOur engineers and scientists have worked tirelessly behind the scenes for months to not only process the more than 70 grams of material we were able to access previously, but also design, develop, and test new tools that allowed us to move past this hurdle,\u201d said Eileen Stansbery, division chief for ARES (Astromaterials Research and Exploration Science) at Johnson.<\/p>\n
\u201cThe innovation and dedication of this team has been remarkable. We are all excited to see the remaining treasure OSIRIS-REx holds,\u201dStansbery added.<\/p>\n
The team said steps now are underway to complete the disassembly of the Touch-and-Go Sample Acquisition Mechanism, or TAGSAM head, to reveal the rest of the rocks and dust delivered by NASA\u2019s first asteroid sample return mission.<\/p>\n
The remainder of the bulk sample will be fully visible after a few additional disassembly steps, at which point image specialists will take ultra-high-resolution pictures of the sample while it is still inside the TAGSAM head.<\/p>\n
This portion of the sample will then be removed and weighed, and the team will be able to determine the total mass of Bennu material captured by the mission.<\/p>\n
Curation processors paused disassembly of the TAGSAM head hardware in mid-October after they discovered that two of the 35 fasteners could not be removed with the tools approved for use inside the OSIRIS-REx glovebox.<\/p>\n
In response, two new multi-part tools were designed and fabricated to support further disassembly of the TAGSAM head. These tools include newly custom-fabricated bits made from a specific grade of surgical, non-magnetic stainless steel; the hardest metal approved for use in the pristine curation gloveboxes.<\/p>\n
\u201cIn addition to the design challenge of being limited to curation-approved materials to protect the scientific value of the asteroid sample, these new tools also needed to function within the tightly-confined space of the glovebox, limiting their height, weight, and potential arc movement,\u201d said Dr. Nicole Lunning, OSIRIS-REx curator at Johnson.<\/p>\n
\u201cThe curation team showed impressive resilience and did incredible work to get these stubborn fasteners off the TAGSAM head so we can continue disassembly. We are overjoyed with the success.\u201d<\/p>\n
Despite not being able to fully disassemble the TAGSAM head, the curation team members had already collected 2.48 ounces (70.3 grams) of asteroid material from the sample hardware, surpassing the agency\u2019s goal of bringing at least 60 grams to Earth.<\/p>\n
They have fulfilled all the sample requests received from the OSIRIS-REx science team so far and have hermetically sealed some of the Bennu sample for better preservation over long timescales (e.g., multiple decades), storing some at ambient temperature conditions and others at -112 Fahrenheit (-80 degrees Celsius).<\/p>\n","protected":false},"excerpt":{"rendered":"
Mission officials at NASA\u2019s OSIRIS-REx have successfully unlocked the last two of the 35 fasteners from the sampler head that\u2026<\/p>\n","protected":false},"author":28,"featured_media":25114,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[8226,8224,8227,8225,302,8223],"class_list":["post-25111","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-asteroid-bennu-sample-material","tag-asteroid-samples","tag-landing-on-asteroid","tag-mission-officials","tag-nasa","tag-osiris-rex"],"reading_time":"3 min read","_links":{"self":[{"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/posts\/25111","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/users\/28"}],"replies":[{"embeddable":true,"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/comments?post=25111"}],"version-history":[{"count":0,"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/posts\/25111\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/media\/25114"}],"wp:attachment":[{"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/media?parent=25111"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/categories?post=25111"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.businessupturn.com\/usa\/wp-json\/wp\/v2\/tags?post=25111"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}